Licensed excavation, Kirrawee

Excavation & Earthworks Kirrawee

Kirrawee is an established Shire suburb on sandstone, pool, basement and knock-down work with rock at shallow depth. The regular jobs here are pool digs, basement digs and site cuts. Services located first, sites left level and clean.

Get a free quote
★★★★★
4.9 from happy Sydney customers
Request your free quote

No obligation, free site quote.

Licensed operators
Dial Before You Dig
Fully insured work
Local Sydney crew
Rock
Digs handled
Mini to 35t
Machine range
4.9★
Average rating
Free
Site quotes
What Shire and St George jobs need

Sandstone under the Shire, sand on the bay, and duplexes in between

Digging in Kirrawee is sandstone country with sand on the bay and duplexes in between. Across the Shire the rock sits within a metre, so a pool, a basement or a garage cut is sawn at the boundaries and broken out; on the bayside flats it's Botany Bay sand with the water table close, shored and dewatered instead. The St George ridges are shale over sandstone and duplex territory, and bush gullies with bushfire ratings run through half the Shire, so the site look settles the ground before the quote.

Sandstone sawn at the boundaries, broken in the middle, carted as rock
Duplex pads cut to spec on the St George ridges
Dilapidation and vibration handled before the breaker starts
Fill placed in compacted layers for reactive clay
Excavation in Kirrawee

What's different about digging in Kirrawee

Kirrawee, in short

Kirrawee sits about 26 kilometres south of the city. Locals place it by Kirrawee shops, Kirrawee Brick Pit and Kirrawee station. It's ringed by Sutherland, Gymea, Miranda, Grays Point and Kareela. What's changing: knock-down rebuilds, duplexes, pools and unit sites, and basements cut into rock near the centres.

The houses, and what they need

Most of Kirrawee is post-war and mid-century brick homes with unit blocks near the centres, over by Kirrawee shops. Near Kirrawee shops, knock-down rebuilds are the running theme. In Kirrawee that's pool digs, basement digs and site cuts more often than not.

The ground under Kirrawee

Kirrawee sits on Hawkesbury sandstone under shallow soil on the Shire ridge, out toward Kirrawee shops. The rock under Kirrawee Brick Pit is close, so Kirrawee footings and pits are broken out and the spoil leaves the block as rock. Around Gymea, reactive clay, so the fill is layered and compacted.

The council, access, and getting to you

Kirrawee falls under Sutherland Shire Council, no overlay on the Kirrawee shops blocks, so cut and fill is standard DA or CDC work. Machines reach the Kirrawee block off Kareena Road or Kingsway, out toward Sutherland.

How it runs

First call to clean handover

Every job follows the same sequence, whether it's a single trench or a full site cut.

Services located 01

Assess & quote

Site visit, plan review and Dial Before You Dig. One clear quote covering dig, cartage and cleanup.

Access protected 02

Set out & protect

Levels marked, driveway and surfaces protected, machine sized to the site.

Spoil carted 03

Dig & cart

Dug to plan and level, spoil carted as we go so the site keeps moving.

To level 04

Trim & hand over

Site trimmed, tidy and to level, ready for the next trade.

A trench can be a day, a basement can be weeks. Dates come with the quote, not after.

Where we work

Where around Kirrawee we dig

Kirrawee and the streets around it, from the older estates to the new blocks.

SutherlandGymeaMirandaGrays PointKareela
Sutherland Shire & St George

Excavation across Kirrawee

From the older streets to the newer blocks, Kirrawee and the suburbs around it. If you're anywhere in the Kirrawee area, we can get to you.

See the whole Shire and St George →
Recent work

Sites we've dug

Backyards to building sites, right across Sydney.
Penrith Site cut
Castle Hill Pool dig
Ryde Basement
Liverpool Civil
“Very easy to deal with.
Excellent communication”
Priya, Penrith
“Left the site spotless.” Dave, Castle Hill
“Would definitely recommend them!” Marcus, Ryde
“Great job thanks so much.” Lauren, Liverpool
“Very easy to deal with. Excellent communication” Priya, Penrith “Left the site spotless.” Dave, Castle Hill “Would definitely recommend them!” Marcus, Ryde “Great job thanks so much.” Lauren, Liverpool
“Very easy to deal with. Excellent communication” Priya, Penrith “Left the site spotless.” Dave, Castle Hill “Would definitely recommend them!” Marcus, Ryde “Great job thanks so much.” Lauren, Liverpool

Excavation in Kirrawee, answered

How much does excavation cost in Kirrawee?

It depends on the volume of material, the ground (hawkesbury sandstone under shallow soil on the shire ridge), access for the machine and how far spoil has to be carted. Every job gets a written quote after a site look, with the dig, cartage and cleanup spelled out, so you know what’s included before anything starts.

Do I need council approval before you dig in Kirrawee?

Usually, if the excavation is part of a build. Cut and fill beyond set limits, work near boundaries and anything on a lot with a flood, bushfire or heritage overlay needs approval as part of the DA or CDC. We work to the approved plans; check with your certifier before the dig is booked.

How long does an excavation job take in Kirrawee?

A trench, pool dig or single pad is a day or two; a knock-down site cut or a basement runs longer and depends on volume, ground and weather. Dates come with the quote, not after.

Is there rock in Kirrawee?

Yes. Hawkesbury sandstone under shallow soil on the Shire ridge. Across the Shire and on the St George ridges, sandstone is usually within the first metre, so pools, basements and garage cuts are rock jobs: sawn at the boundaries, broken in the middle, carted as rock. It’s in the quote from the site look.

Can you dig a pool into the rock on my Kirrawee block?

Yes, and it’s the standard Shire pool. The shell outline is sawn into the sandstone, the middle is broken out, the rock is carted, and the edges are left clean for the concrete or the fibreglass shell. Slower than a clay dig and priced for it.

Do you do duplex site cuts in Kirrawee?

Yes. Through St George it’s the most common job: the old house down, slab and footings out, the block stripped, and two pads cut to the engineer’s spec, in clay on the ridge top and into sandstone where the design goes deep.

My Kirrawee block backs onto a bush gully with a bushfire rating. What does that mean for the dig?

Three things: the back of the block is sandstone and steep, the bush carries an asset protection zone that sets clearing distances, and the trees are protected. The cut is benched, retaining is planned in, and the clearing is done to the approved plan.

There’s no way to get a machine onto my Kirrawee waterfront block. Can you still dig?

Yes. Mini machines are craned in over the house or walked through it, rock is broken out and craned or barrowed away, and on the Port Hacking and Georges River blocks a barge is sometimes the answer. Slower than a side-gate job and priced for it.

What happens next

Tell us the job. We'll size it up.

Tell us the suburb, the access and what needs digging
We'll come out and look before quoting anything
You'll get a written quote with what's included spelled out
The machine's matched to your access, not whatever's free
Clear on spoil, cartage and cleanup before we start
No obligation, no pressure
Get a free quote
Excavator arm breaking rock on a Sydney site
Free quote

Ready to get your dig underway?

Tell us about the job. We'll look at the site before quoting, so you know what's included before anything starts.

Written quote after a proper site look
Free quote after a proper site assessment
Request your quote
No obligation, free site quote