Assess & quote
Site visit, plan review and Dial Before You Dig. One clear quote covering dig, cartage and cleanup.
Bexley North is a Federation-and-brick suburb on the Hurstville ridge, basement, pool and knock-down work over shale and shallow rock. The regular jobs here are basement digs, pool digs and site cuts. Services located first, sites left level and clean.
Get a free quoteNo obligation, free site quote.
Got it, thanks. We'll be in touch to arrange your site assessment and clear quote.
From a knock-down rebuild to a new estate pad, each service has its own page with the detail.
Bexley North sits about 14 kilometres south of the city. You'll recognise it by Bexley North shops, Bexley North station and Wolli Creek valley. It's ringed by Bexley, Kingsgrove, Arncliffe and Rockdale. What's changing: knock-down rebuilds, duplexes, pools and unit sites, and basements over shale and rock near the centres.
In Bexley North, near Bexley North shops, it's mostly federation and post-war brick homes with apartments near the centres. Near Bexley North shops, duplex and unit sites cluster near the centres. On a Bexley North block that usually means basement digs, pool digs and site cuts.
Bexley North ground runs to Wianamatta shale over Hawkesbury sandstone on the Hurstville ridge, over by Bexley North shops. On the Bexley North blocks toward Bexley North station the rock is shallow, so pools, piers and basements are sawn clean and broken rather than dug. Around Kingsgrove, the clay is reactive, so fill goes in in compacted layers.
Around Bexley North shops, Bexley North sits in Georges River Council with no flood or bushfire overlay, a standard DA or CDC job. Into Bexley North the crew comes off Forest Road or King Georges Road.
Every job follows the same sequence, whether it's a single trench or a full site cut.
A trench can be a day, a basement can be weeks. Dates come with the quote, not after.
Bexley North and the streets around it, from the older estates to the new blocks.
From the older streets to the newer blocks, Bexley North and the suburbs around it. If you're anywhere in the Bexley North area, we can get to you.
See the whole Shire and St George →It depends on the volume of material, the ground (wianamatta shale over hawkesbury sandstone on the hurstville ridge), access for the machine and how far spoil has to be carted. Every job gets a written quote after a site look, with the dig, cartage and cleanup spelled out, so you know what’s included before anything starts.
Usually, if the excavation is part of a build. Cut and fill beyond set limits, work near boundaries and anything on a lot with a flood, bushfire or heritage overlay needs approval as part of the DA or CDC. We work to the approved plans; check with your certifier before the dig is booked.
A trench, pool dig or single pad is a day or two; a knock-down site cut or a basement runs longer and depends on volume, ground and weather. Dates come with the quote, not after.
Yes. Wianamatta shale over Hawkesbury sandstone on the Hurstville ridge. Across the Shire and on the St George ridges, sandstone is usually within the first metre, so pools, basements and garage cuts are rock jobs: sawn at the boundaries, broken in the middle, carted as rock. It’s in the quote from the site look.
Yes, and it’s the standard Shire pool. The shell outline is sawn into the sandstone, the middle is broken out, the rock is carted, and the edges are left clean for the concrete or the fibreglass shell. Slower than a clay dig and priced for it.
Yes. Through St George it’s the most common job: the old house down, slab and footings out, the block stripped, and two pads cut to the engineer’s spec, in clay on the ridge top and into sandstone where the design goes deep.
Yes. Mini machines are craned in over the house or walked through it, rock is broken out and craned or barrowed away, and on the Port Hacking and Georges River blocks a barge is sometimes the answer. Slower than a side-gate job and priced for it.
Reactive clay. It swells in wet winters and shrinks in dry summers, and anything poured on loose or uncompacted fill moves with it. A pad cut and filled in compacted layers to the engineer’s spec is what stops the new slab doing the same thing.
Tell us about the job. We'll look at the site before quoting, so you know what's included before anything starts.
Request received. We'll be in touch to arrange your site assessment and clear quote.