Assess & quote
Site visit, plan review and Dial Before You Dig. One clear quote covering dig, cartage and cleanup.
Villawood is a post-war brick-home suburb on Cumberland Plain shale, knock-down, granny-flat and pool work with reactive-clay footings. The regular jobs here are pool digs, site cuts and knock-down rebuild site cuts. Services located first, sites left level and clean.
Get a free quoteNo obligation, free site quote.
Got it, thanks. We'll be in touch to arrange your site assessment and clear quote.
From a knock-down rebuild to a new estate pad, each service has its own page with the detail.
Villawood sits about 24 kilometres south-west of the city. You'll recognise it by Villawood shops, Villawood detention centre and Woodville Road. It's ringed by Chester Hill, Bass Hill, Carramar, Fairfield East and Sefton. What's changing: knock-down rebuilds, granny flats and dual-occupancy, and pools and townhouses on the older lots.
Most blocks in Villawood, around Villawood shops, are federation and post-war brick homes with granny flats and knock-down rebuilds. Near Villawood shops, knock-down rebuilds are the running theme. On a Villawood block that usually means pool digs, site cuts and knock-down rebuild site cuts.
Out toward Villawood shops, Villawood sits on Wianamatta shale over reactive clay on the Cumberland Plain. On the flat Villawood blocks around Villawood detention centre, the fall has to be cut into the pad and the trench because the ground gives none of its own. Around Bass Hill, the clay is reactive, so fill goes in in compacted layers.
Around Villawood shops, Villawood sits in City of Canterbury-Bankstown with no flood or bushfire overlay, a standard DA or CDC job. Into Villawood the crew comes off the Hume Highway or Chapel Road.
Every job follows the same sequence, whether it's a single trench or a full site cut.
A trench can be a day, a basement can be weeks. Dates come with the quote, not after.
Villawood and the streets around it, from the older estates to the new blocks.
From the older streets to the newer blocks, Villawood and the suburbs around it. If you're anywhere in the Villawood area, we can get to you.
See the whole Bankstown and Canterbury area →It depends on the volume of material, the ground (wianamatta shale over reactive clay on the cumberland plain), access for the machine and how far spoil has to be carted. Every job gets a written quote after a site look, with the dig, cartage and cleanup spelled out, so you know what’s included before anything starts.
Usually, if the excavation is part of a build. Cut and fill beyond set limits, work near boundaries and anything on a lot with a flood, bushfire or heritage overlay needs approval as part of the DA or CDC. We work to the approved plans; check with your certifier before the dig is booked.
A trench, pool dig or single pad is a day or two; a knock-down site cut or a basement runs longer and depends on volume, ground and weather. Dates come with the quote, not after.
Rarely on the flat streets. Wianamatta shale over reactive clay on the Cumberland Plain. Shale under the clay is ripped rather than broken. The rock in this region is on the Georges River side, not around Bankstown and Canterbury centres.
Yes, and Canterbury-Bankstown is the busiest duplex market in Sydney. The old house down, slab and footings out, the block stripped, and two pads cut and compacted to the engineer’s spec, with the shared driveway boxed out at the same time.
It’s one of the easiest councils for it, and the 50s and 60s blocks have the room. A mini excavator through the side access, the pad cut level and compacted on the clay, and the service trenches run at the same time.
Reactive clay. It swells in wet winters and shrinks in dry summers, and anything poured on loose or uncompacted fill moves with it. A pad cut and filled in compacted layers to the engineer’s spec is what stops the new slab doing the same thing.
Yes. The old house down, slab and footings out, the block stripped and the new pad cut and compacted, as one run if you want the demolition handled too.
Tell us about the job. We'll look at the site before quoting, so you know what's included before anything starts.
Request received. We'll be in touch to arrange your site assessment and clear quote.