Assess & quote
Site visit, plan review and Dial Before You Dig. One clear quote covering dig, cartage and cleanup.
Rydalmere runs from ridge cottages down to a redeveloping river and industrial flat, where fill and flood levels shape the deeper digs. The regular jobs here are basement digs, site cuts and knock-down rebuild site cuts. Services located first, sites left level and clean.
Get a free quoteNo obligation, free site quote.
Got it, thanks. We'll be in touch to arrange your site assessment and clear quote.
From a knock-down rebuild to a new estate pad, each service has its own page with the detail.
Rydalmere sits about 23 kilometres west of the city. You'll recognise it by Rydalmere light rail, Western Sydney University Rydalmere, Parramatta River and Camellia precinct nearby. It's ringed by Dundas, Telopea, Ermington and Parramatta. What's changing: riverfront apartments and mixed-use, and townhouses on the older streets.
Most of Rydalmere is postwar cottages and brick veneer with riverfront apartment and industrial redevelopment, over by Rydalmere light rail. Near Rydalmere light rail, duplex and unit sites cluster near the centres. Day to day around Dundas that's basement digs, site cuts and knock-down rebuild site cuts.
On the ridge with Parramatta River alluvium and reclaimed industrial land on the flats, Rydalmere ground runs to Shale clay, near Rydalmere light rail. Rydalmere carries flood-planning ground toward Telopea: the level fixes the floor height, so the job is often fill up and certify rather than cut down. Around Telopea, the clay is reactive, so fill goes in in compacted layers.
Around Rydalmere light rail, Rydalmere carries flood controls in City of Parramatta, dug to the approved plans. Into Rydalmere the crew comes off Victoria Road or Kissing Point Road; the side access takes a mini excavator.
Every job follows the same sequence, whether it's a single trench or a full site cut.
A trench can be a day, a basement can be weeks. Dates come with the quote, not after.
Rydalmere and the streets around it, from the older estates to the new blocks.
From the older streets to the newer blocks, Rydalmere and the suburbs around it. If you're anywhere in the Rydalmere area, we can get to you.
See the whole Parramatta and Cumberland area →It depends on the volume of material, the ground (shale clay on the ridge with parramatta river alluvium and reclaimed industrial land on the flats), access for the machine and how far spoil has to be carted. Every job gets a written quote after a site look, with the dig, cartage and cleanup spelled out, so you know what’s included before anything starts.
Usually, if the excavation is part of a build. Cut and fill beyond set limits, work near boundaries and anything on a lot with a flood, bushfire or heritage overlay needs approval as part of the DA or CDC. We work to the approved plans; check with your certifier before the dig is booked.
A trench, pool dig or single pad is a day or two; a knock-down site cut or a basement runs longer and depends on volume, ground and weather. Dates come with the quote, not after.
Rarely. Shale clay on the ridge with Parramatta River alluvium and reclaimed industrial land on the flats. Shale under the clay is ripped rather than broken. Real rock work in this region is along the river and at Prospect, not on the flat streets.
Yes. Multi-level basements in Rydalmere are dug in stages to the shoring engineer’s sequence, boundaries sawn and protected, with groundwater from the river and the creeks planned for from the geotech. Spoil is trucked on a schedule so the street stays clear.
It’s common around Prospect. Shale clay on the ridge with Parramatta River alluvium and reclaimed industrial land on the flats. Filled quarry ground is tested and either removed or re-compacted to the engineer’s spec before anything goes on it, and the site look tells you which before the quote.
Reactive clay. It swells in wet winters and shrinks in dry summers, and anything poured on loose or uncompacted fill moves with it. A pad cut and filled in compacted layers to the engineer’s spec is what stops the new slab doing the same thing.
Yes, and it changes the job. A flood planning level sets the floor height, which can mean filling up rather than cutting down, with the fill placed in layers and certified, or it can restrict fill altogether. The site look and your approved plans decide it before the quote.
Tell us about the job. We'll look at the site before quoting, so you know what's included before anything starts.
Request received. We'll be in touch to arrange your site assessment and clear quote.