Assess & quote
Site visit, plan review and Dial Before You Dig. One clear quote covering dig, cartage and cleanup.
Regentville bridges the Penrith flats and the Mulgoa slopes, mixing 90s estate blocks with semi-rural ground and shallow sandstone. The regular jobs here are pool digs, granny flat and shed pads and retaining walls. Services located first, sites left level and clean.
Get a free quoteNo obligation, free site quote.
Got it, thanks. We'll be in touch to arrange your site assessment and clear quote.
From a knock-down rebuild to a new estate pad, each service has its own page with the detail.
Regentville sits about 54 kilometres west of the city. You'll recognise it by Regentville Public School, Mulgoa Road, Surveyors Creek and Panthers golf nearby. It's ringed by Glenmore Park, Jamisontown, Mulgoa, South Penrith and Penrith. What's changing: mature estate — pools, granny flats and extensions.
Around Regentville, near Regentville Public School, you're mostly on 1990s estate homes and some older semi-rural blocks toward Mulgoa. Near Regentville Public School, the estate lots start as builder site cuts and grow into pools, sheds and extensions. The work that comes out of Regentville is pool digs, granny flat and shed pads and retaining walls.
Regentville ground runs to reactive shale clay with sandstone toward the Mulgoa slopes, over by Regentville Public School. Sandstone sits close to the surface around Mulgoa Road, so a Regentville cut is sawn at the boundaries and broken out for anything deep. Around Jamisontown, reactive clay, so the fill is layered and compacted.
Regentville is in Penrith City Council, and the Regentville Public School blocks carry bushfire controls, dug to the approved plans. Machines come in to Regentville off the M4 or Mulgoa Road, and there's a side gate wide enough for a mini.
Every job follows the same sequence, whether it's a single trench or a full site cut.
A trench can be a day, a basement can be weeks. Dates come with the quote, not after.
Regentville and the streets around it, from the older estates to the new blocks.
From the older streets to the newer blocks, Regentville and the suburbs around it. If you're anywhere in the Regentville area, we can get to you.
See the whole Nepean →Regentville jobs are usually clay rather than rock, which keeps the dig itself straightforward, so cost comes down to the volume of material, how much fill and compaction the site needs, access, and cartage. Every job gets a written quote after a site look, with the dig, fill, cartage and cleanup spelled out.
Usually, if the excavation is part of a build. Cut and fill beyond set limits, work near boundaries and anything on a flood-affected or bushfire-rated lot needs approval as part of the DA or CDC. We work to the approved plans; check with your certifier before the dig is booked.
A small site cut, trench or pool dig can be a day or two; a knock-down rebuild site cut or a basement runs longer and depends on volume, fill and weather. Dates come with the quote, not after.
Rarely. Reactive shale clay with sandstone toward the Mulgoa slopes. Shale bands and river gravel are ripped rather than broken, and rock excavation as such is a North Shore and Eastern Suburbs problem, not a Nepean one.
Reactive clay. It swells in wet winters and shrinks in dry summers, and anything sitting on loose or uncompacted fill moves with it. A pad cut and filled in compacted layers to the engineer's spec is what stops the new slab doing the same thing.
Yes, and on the older estates it's the most common job. The old house down, slab and footings out, the block stripped and the new pad cut and compacted, as one run if you want the demolition handled too.
Yes. Blocks in Regentville generally have the backyard and the access for it, and clay cuts clean walls for the shell. The pool builder's engineer will usually want the base checked for soft spots, which is standard on this ground.
Yes. A mini excavator through the side access, the pad cut level and compacted, and the service trenches run at the same time. Topsoil and spoil go out the way the machine came in.
Tell us about the job. We'll look at the site before quoting, so you know what's included before anything starts.
Request received. We'll be in touch to arrange your site assessment and clear quote.