Excavation & Earthworks North Kellyville

It depends on the volume of material, the ground (shale over clay with sandstone toward the creek gullies), access for the machine and how far spoil has to be carted. Every job gets a written quote after a site look, with the dig, cartage and cleanup spelled out, so you know what’s included before anything starts.

Usually, if the excavation is part of a build. Cut and fill beyond set limits, work near boundaries and anything on a lot with a flood, bushfire or heritage overlay needs approval as part of the DA or CDC. We work to the approved plans; check with your certifier before the dig is booked.

A trench, pool dig or single pad is a day or two; a knock-down site cut or a basement runs longer and depends on volume, ground and weather. Dates come with the quote, not after.

Yes. Shale over clay with sandstone toward the creek gullies, engineered fill on the estate. North of Glenhaven and down in the gullies, sandstone is usually within the first metre, ripped where it’s weathered and broken where it’s solid. It’s in the quote when the site look finds it.

The block is benched: cut into two or three levels to the engineer’s plan, with retaining walls where the levels meet, so the new house sits on a flat pad instead of on fill. Cut and fill on slopes is regulated, so it goes through the approval with the retaining design.

Yes, and it’s the standard Hills pool. The shell sits on a bench cut into the hillside, with a cut for the retaining wall on the uphill side and the downhill side formed. The pool builder’s engineer decides the bench, and the site look decides the machine.

Reactive clay. It swells in wet winters and shrinks in dry summers, and anything poured on loose or uncompacted fill moves with it. A pad cut and filled in compacted layers to the engineer’s spec is what stops the new slab doing the same thing.

Yes. One house down, the block stripped, and two pads cut and compacted to the engineer’s spec, with the basement dug if the design has one.