Assess & quote
Site visit, plan review and Dial Before You Dig. One clear quote covering dig, cartage and cleanup.
Glenorie is a rural ridge village in the sandstone-acreage belt, orchard and horse country where clearing and rock lead. The regular jobs here are clearing and acreage work, driveway cuts and retaining walls. Services located first, sites left level and clean.
Get a free quoteNo obligation, free site quote.
Got it, thanks. We'll be in touch to arrange your site assessment and clear quote.
From a knock-down rebuild to a new estate pad, each service has its own page with the detail.
Glenorie sits about 45 kilometres north-west of the city. It's anchored by Glenorie shops, Glenorie RSL, Cattai Ridge Road and Maroota State Forest. It's ringed by Middle Dural, Kenthurst, South Maroota, Maraylya and Dural. What's changing: rural — sheds, dams, driveways and rural builds.
In Glenorie, near Glenorie shops, it's mostly rural village, acreage, orchards and horse properties. Near Glenorie shops, the bigger blocks are clearing, dam and shed work. The work that comes out of Glenorie is clearing and acreage work, driveway cuts and retaining walls.
Glenorie sits on Shale over sandstone with rock outcrops on the ridges; deep bushland gullies, out toward Glenorie shops. Around Glenorie RSL a Glenorie dig hits sandstone in the first metre, sawn at the edges so the neighbour's ground stays put and broken in the middle. Around Kenthurst, the clay is reactive, so fill goes in in compacted layers.
Glenorie is The Hills Shire Council ground; near Glenorie shops, bushfire controls apply and we dig to the approved plans. The Glenorie crew comes in off Post Office Road or Cattai Ridge Road, where the blocks are wide with room to work.
Every job follows the same sequence, whether it's a single trench or a full site cut.
A trench can be a day, a basement can be weeks. Dates come with the quote, not after.
Glenorie and the streets around it, from the older estates to the new blocks.
From the older streets to the newer blocks, Glenorie and the suburbs around it. If you're anywhere in the Glenorie area, we can get to you.
See the whole Hills →It depends on the volume of material, the ground (shale over sandstone with rock outcrops on the ridges), access for the machine and how far spoil has to be carted. Every job gets a written quote after a site look, with the dig, cartage and cleanup spelled out, so you know what’s included before anything starts.
Usually, if the excavation is part of a build. Cut and fill beyond set limits, work near boundaries and anything on a lot with a flood, bushfire or heritage overlay needs approval as part of the DA or CDC. We work to the approved plans; check with your certifier before the dig is booked.
A trench, pool dig or single pad is a day or two; a knock-down site cut or a basement runs longer and depends on volume, ground and weather. Dates come with the quote, not after.
Yes. Shale over sandstone with rock outcrops on the ridges; deep bushland gullies. North of Glenhaven and down in the gullies, sandstone is usually within the first metre, ripped where it’s weathered and broken where it’s solid. It’s in the quote when the site look finds it.
The block is benched: cut into two or three levels to the engineer’s plan, with retaining walls where the levels meet, so the new house sits on a flat pad instead of on fill. Cut and fill on slopes is regulated, so it goes through the approval with the retaining design.
Yes, and it’s the standard Hills pool. The shell sits on a bench cut into the hillside, with a cut for the retaining wall on the uphill side and the downhill side formed. The pool builder’s engineer decides the bench, and the site look decides the machine.
Yes. House and shed pads cut into the ridge, dams shaped in clay or cut into rock, and long driveways boxed and based. Tree and bushfire rules apply across the northern acreage and are checked before anything starts.
Reactive clay. It swells in wet winters and shrinks in dry summers, and anything poured on loose or uncompacted fill moves with it. A pad cut and filled in compacted layers to the engineer’s spec is what stops the new slab doing the same thing.
Tell us about the job. We'll look at the site before quoting, so you know what's included before anything starts.
Request received. We'll be in touch to arrange your site assessment and clear quote.