Assess & quote
Site visit, plan review and Dial Before You Dig. One clear quote covering dig, cartage and cleanup.
Earlwood is a Federation-and-brick suburb on shale between the Cooks River and Wolli Creek, knock-down, pool and retaining work. The regular jobs here are pool digs, site cuts and knock-down rebuild site cuts. Services located first, sites left level and clean.
Get a free quoteNo obligation, free site quote.
Got it, thanks. We'll be in touch to arrange your site assessment and clear quote.
From a knock-down rebuild to a new estate pad, each service has its own page with the detail.
Earlwood sits about 11 kilometres south-west of the city. You'll recognise it by Earlwood shops, Cooks River, Wolli Creek and Kingsgrove nearby. It's ringed by Canterbury, Clemton Park, Kingsgrove and Campsie. What's changing: knock-down rebuilds, granny flats and dual-occupancy, and pools and townhouses on the older lots.
Most blocks in Earlwood, around Earlwood shops, are federation and post-war brick homes with granny flats and knock-down rebuilds. Near Earlwood shops, duplex and unit sites cluster near the centres. Day to day around Canterbury that's pool digs, site cuts and knock-down rebuild site cuts.
Out toward Earlwood shops, Earlwood sits on Wianamatta shale over clay grading to the Cooks River and Wolli Creek valleys. On the Earlwood rise the block is cut into benches with the retaining designed in, so the fall is handled rather than fought. Around Clemton Park, reactive clay, so the fill is layered and compacted.
Around Earlwood shops, Earlwood sits in City of Canterbury-Bankstown with no flood or bushfire overlay, a standard DA or CDC job. Into Earlwood the crew comes off Homer Street or William Street.
Every job follows the same sequence, whether it's a single trench or a full site cut.
A trench can be a day, a basement can be weeks. Dates come with the quote, not after.
Earlwood and the streets around it, from the older estates to the new blocks.
From the older streets to the newer blocks, Earlwood and the suburbs around it. If you're anywhere in the Earlwood area, we can get to you.
See the whole Bankstown and Canterbury area →It depends on the volume of material, the ground (wianamatta shale over clay grading to the cooks river and wolli creek valleys), access for the machine and how far spoil has to be carted. Every job gets a written quote after a site look, with the dig, cartage and cleanup spelled out, so you know what’s included before anything starts.
Usually, if the excavation is part of a build. Cut and fill beyond set limits, work near boundaries and anything on a lot with a flood, bushfire or heritage overlay needs approval as part of the DA or CDC. We work to the approved plans; check with your certifier before the dig is booked.
A trench, pool dig or single pad is a day or two; a knock-down site cut or a basement runs longer and depends on volume, ground and weather. Dates come with the quote, not after.
Rarely on the flat streets. Wianamatta shale over clay grading to the Cooks River and Wolli Creek valleys. Shale under the clay is ripped rather than broken. The rock in this region is on the Georges River side, not around Bankstown and Canterbury centres.
Yes, and Canterbury-Bankstown is the busiest duplex market in Sydney. The old house down, slab and footings out, the block stripped, and two pads cut and compacted to the engineer’s spec, with the shared driveway boxed out at the same time.
The block is benched into levels with retaining, and the lower cuts usually go into sandstone, which is sawn and broken. Bush along the river brings bushfire and tree rules too. The site look decides the approach and the machine.
Reactive clay. It swells in wet winters and shrinks in dry summers, and anything poured on loose or uncompacted fill moves with it. A pad cut and filled in compacted layers to the engineer’s spec is what stops the new slab doing the same thing.
Yes. The old house down, slab and footings out, the block stripped and the new pad cut and compacted, as one run if you want the demolition handled too.
Tell us about the job. We'll look at the site before quoting, so you know what's included before anything starts.
Request received. We'll be in touch to arrange your site assessment and clear quote.