Assess & quote
Site visit, plan review and Dial Before You Dig. One clear quote covering dig, cartage and cleanup.
Canley Vale is a post-war brick-home suburb on Cumberland Plain shale, knock-down, granny-flat and pool work with reactive-clay footings. The regular jobs here are pool digs, site cuts and knock-down rebuild site cuts. Services located first, sites left level and clean.
Get a free quoteNo obligation, free site quote.
Got it, thanks. We'll be in touch to arrange your site assessment and clear quote.
From a knock-down rebuild to a new estate pad, each service has its own page with the detail.
Canley Vale sits about 26 kilometres south-west of the city. It's anchored by Canley Vale shops, Orphan School Creek and Canley Vale station. It's ringed by Canley Heights, Fairfield, Cabramatta, Carramar and Lansvale. What's changing: knock-down rebuilds, granny flats and dual-occupancy, and pools on the older brick blocks.
Most of Canley Vale is post-war and 1960s-70s brick homes with granny flats and knock-down rebuilds, over by Canley Vale shops. Near Canley Vale shops, the older brick and fibro is renovate-or-rebuild ground. On a Canley Vale block that usually means pool digs, site cuts and knock-down rebuild site cuts.
On the Cumberland Plain, Canley Vale ground runs to Wianamatta shale over highly reactive clay, near Canley Vale shops. Around Orphan School Creek, Canley Vale is flat enough that the drainage fall is built into the pad and the trenches rather than left to the ground. Around Fairfield, the clay is reactive, so fill goes in in compacted layers.
Canley Vale is in Fairfield City Council, and around Canley Vale shops there's no flood or bushfire overlay, so it's a standard DA or CDC job. Machines come in to Canley Vale off Sackville Street or Canley Vale Road.
Every job follows the same sequence, whether it's a single trench or a full site cut.
A trench can be a day, a basement can be weeks. Dates come with the quote, not after.
Canley Vale and the streets around it, from the older estates to the new blocks.
From the older streets to the newer blocks, Canley Vale and the suburbs around it. If you're anywhere in the Canley Vale area, we can get to you.
See the whole Liverpool and Fairfield area →It depends on the volume of material, the ground (wianamatta shale over highly reactive clay on the cumberland plain), access for the machine and how far spoil has to be carted. Every job gets a written quote after a site look, with the dig, cartage and cleanup spelled out, so you know what’s included before anything starts.
Usually, if the excavation is part of a build. Cut and fill beyond set limits, work near boundaries and anything on a lot with a flood, bushfire or heritage overlay needs approval as part of the DA or CDC. We work to the approved plans; check with your certifier before the dig is booked.
A trench, pool dig or single pad is a day or two; a knock-down site cut or a basement runs longer and depends on volume, ground and weather. Dates come with the quote, not after.
Rarely. Wianamatta shale over highly reactive clay on the Cumberland Plain. Shale under the clay is ripped rather than broken. Real rock work is a North Shore and Eastern Suburbs problem, not a south-west one.
Yes, and across Liverpool and Fairfield it’s the most common job. The old house down, slab and footings out, the block stripped, and two pads cut and compacted to the engineer’s spec on the clay.
Reactive clay. It swells in wet winters and shrinks in dry summers, and anything poured on loose or uncompacted fill moves with it. A pad cut and filled in compacted layers to the engineer’s spec is what stops the new slab doing the same thing.
Yes. The old house down, slab and footings out, the block stripped and the new pad cut and compacted, as one run if you want the demolition handled too.
Yes. Wianamatta shale over highly reactive clay on the Cumberland Plain. The pool builder’s engineer will usually want the base checked, which is standard, and the machine is sized to the side access.
Tell us about the job. We'll look at the site before quoting, so you know what's included before anything starts.
Request received. We'll be in touch to arrange your site assessment and clear quote.